The cause of drawing of permanent antistatic Masterbatch
When adding permanent anti-static masterbatch, the phenomenon of wire drawing will occur, so what is the cause?
First of all, we should think that the raw material contains water. In the drawing process of permanent antistatic masterbatch, there are bubbles and broken wires. Therefore, attention should be paid to water-proof, moisture-proof, ventilation and direct sunlight. Materials with high moisture content shall be dried before use.
The second is that the thermal traction ratio is not appropriate. The traction ratio is too small, the wire is not fully stretched, and the tension is small. If the hot traction ratio is large and exceeds the limit value of the wire, the wire will break.
The third is that the hot water tank is too short, and the wire fails to reach the maximum value of the anti static resistance ignition masterbatch after overheating traction.
The fourth is the screw speed or fast or slow, traction can not automatically adjust the speed. Causes the silk thickness to be different, affects the silk pulling force or the broken silk.
Article origin: Taishan conductive masterbatch
http://www.vincentpaillard.com
-
05-12
What is the masterbatch in the carbon black conductive masterbatch?
Masterbatch is a kind of plastic processing aid developed in 1980s. It is composed of chemical aid, carrier plastic and dispersant.Masterbatch refers to the granular material produced by mixing, melting, extruding and pelletizing the masterbatch and the carrier plastic through the extruder in order to operate conveniently and blend all kinds of auxiliaries, carrier plastics and dispersants needed,
-
05-12
How to make modified plastics flame retardant?
Modified plastics can be seen everywhere in our life. With the continuous improvement of the performance of plastic materials and the requirements of lightweight products, plastic materials are widely used in construction, furniture, transportation, aviation, aerospace, electrical appliances and other aspects. In many occasions, the materials are required to have flame retardancy, the more commonl
-
05-12
Processing and application of Taishan conductive masterbatch
Processing and application of conductive masterbatchThe domestic demand for plastic antistatic / conductive products is increasing, and the number and variety of electronic product packaging are increasing. The antistatic / conductive products of plastic products, especially attract people's attention, are one of the goals pursued by people in the plastic packaging industry, which adopts domestic
-
05-12
How to test the resistivity of conductive plastics?
In the work of many friends will ask, conductive plastic resistivity is how to test it? To understand this, we need to know what is the definition of resistivity. Resistivity is a physical quantity used to express the resistance characteristics of various substances. The ratio of the product of resistance and cross-sectional area of an element made of a substance (20 ° C at normal temperature) to